Broadcast SRC-32 Manual de usuario descargar pdf (Pagina 18)

If you can see populating the field then you have verified the COM is

working correctly. If the closures are not being recognized with a

functional COM port, then verify your configuration settings are set

properly in ONAIR or Logger.

To Recap:

Install the Virtual Serial Driver required for the supplied USB cable.

Select the COM port you have configured for the VCP (Virtual COM

Port). Configure the closure device in either ONAIR or Logger as the

SRC 32. The GPI 32 uses the same “PIP” codes as used with the SRC

32.

We hope you find this guide useful. If you have any questions or

comments about this guide you can contact OMT support at 1-800-

726-2635 or Sales at 1-888-665-0501.

1 2 ... 13 14 15 16 17 18 19

Sin comentarios

Broadcast SRC-32 Manual de usuario Pagina 18