Broadcast SRC-32 Manual de usuario descargar pdf (Pagina 5)

Double click on Ports (COM & LPT) and verify there is a USB serial

device driver installed.

You may want to change the COM port that the new USB serial driver

is currently on to ensure the available ports are sequential, especially

if you are adding additional serial ports through a PCI card or USB

device.

To change the COM port to a different value, double click on the USB

Serial Port from the Ports (COM & LPT) section of the Device Manager.

Select the Port Settings” tab and click on “Advanced”. This example

shows the port active on COM 3. Be sure to save your “Bits per

second” at 9600 baud rate as it may be created at 2400 when

Windows first installs the new port.

1 2 3 4 5 6 7 8 9 10 ... 18 19

Sin comentarios

Broadcast SRC-32 Manual de usuario Pagina 5