Broadcast SRC-32 Guía de instalación descargar pdf (Pagina 5)

GPI Install Guide

_____________________________________________________________________

13. Start up DAD. After DAD has loaded. Go to SETUP and select CFG & README.

Open the workstation’s CFG file. (Top left button in white)

14. Scroll down towards the bottom of the file and find the line REMOTE = 0.

Modify this line to: REMOTE = PCI “Your Address” oicx

(Example) REMOTE = PCI A000 oicx

GPI-16 NOTE:

If a GPI-16 is being installed, one should modify this line to:

REMOTE = PCI “Your Address” oicxoicx

(Example) REMOTE = PCI A000 oicxoicx

15. Find the line GPO_GPI = 0 0 0 and change it to GPO_GPI = 8 8 16

GPI-16 NOTE:

If a GPI-16 is being installed, one should modify this line to:

GPO_GPI = 16 16 32

16. Save the changes and close the file. Hit the yellow REFRESH Button, then EXIT

DAD. Once DAD has exited, reboot the PC.

To test the card, start DAD, open the LIBRARY, open the COMMAND window and type

the line PULSE GPO 1 1000 and hit EXECUTE. This will send a relay from DAD to

GPO 1. One should be able to hear a “click” on the card itself when the relay opens,

then closes.

1 2 3 4 5 6 7 8 9 10 ... 17 18

Sin comentarios

Broadcast SRC-32 Guía de instalación Pagina 5